Download USER MANUAL - Astec Microflow

11.4.7
Serial No. (item 15 of Fig. 14)
The serial number option, depending on the assigned status of the
setup software, will allow serial numbers of the controller and the
key of the software to be designated.
The format and designation of serial numbers is described in paras
11.4.7.1 and 11.4.7.2.
11.4.7.1 Controller Serial Number Assignment
This facility is only available to Engineer software versions.
To assign or change the serial number of a controller, follow these
steps:
(a)
Click with the cursor on the (Dis)Connect button if the
controller and PC are not already connected. Next click on the
text Serial No.
(b)
Click with the cursor on the text Update Controller. The box
shown in Fig. 16 will then appear.
Figure 16 Software Serial Number
(c)
Type the serial number of the Cabinet in the box at the
blinking cursor. The serial number must comply to the
format: yyyy/mm/d/nnn, (Do not enter the /.) where
• yyyy = year of manufacture
• mm = month of manufacture
• d = department number
© Bioquell
52 Royce Close,
West Portway, Andover
Hampshire SP10 3TS
United Kingdom
TM040-O&M-001
Revision 2
Page 51 of 66
Tele
+44 (0) 1264 835835
Fax
+44 (0) 1264 835836
Email [email protected]
Web
www.bioquell.com