Download INSTALLATION MANUAL

3. OPTIONAL PARTS
Name and Shape
5. SELECTING THE INSTALLATION LOCATION
Q’ty
Application
Consult the customer and determine the installation location according to the
following:
(1) The receiver unit cable can be extended up to 10m. (To extend the
wiring, purchase the optional receiver unit wire C.)
Part No.
Receiver unit wire C
10m
1
For extending
the receiver
unit wire
9707598025
(2) The signal reception angle of the receiver unit is shown in the figures
below.
(3) Do not install the receiver unit near a fluorescent light. (The unit must be
at least 1m away from a light source.)
(4) Do not install the receiver unit where it will be exposed to direct sunlight.
(5) Do not install the receiver unit where it will be exposed directly to the
4. FUNCTIONS AND DIMENSIONS
airflow from the indoor unit.
90
Indoor unit
Max. 10m
Ceiling
OPERATION indicator
lamp (GREEN)
145
TIMER indicator
lamp (ORANGE)
12
0°
Signal reception
angle
Remote
controller
5m
Receiver
unit
ECONOMY indicator
lamp (GREEN)
MANUAL AUTO button
Indoor unit
REMOTE CONTROL
SIGNAL RECEIVER
Max. 10m
Receiver unit
Ceiling
120°
Dimensions
Remote
controller
84.6
11.5
5m
57.6
18.5
57.4
22.9
71.8
Signal reception angle
6. INSTALLING THE RECEIVER UNIT
118.4
• Do not touch the PCB or PCB parts of receiver unit directly with your
hands.
• Fixing of the holder cover with the screws in the standard parts may be
unsuitable if the wall or ceiling material is weak. If so, prepare screws
suitable for the wall or ceiling material, and fix it.
60
83
.5
17
72.4
CAUTION
Unit: mm
En-2