Download MTB40S User Manual

MTB40S User Manual
Rev.02
LED INDICATION
The front led is a RGB indicator (red, green, blue) which shows the following status of the
transmitter:
-
Wireless transmission status: green when RF transmission power is on.
Battery status: green steady, slowly blinking (< 25%), quickly blinking (<12%).
Modulation peek (if activated): red.
Limiter in action (if activated): blue.
BATTERIES
MTB40S is working with 2 AA alkaline or NiMH batteries (select correct type on setup controls).
Battery status can be checked on internal OLED display or looking to LED status on front.
BATTERY SUBSTITUTION
 Open transmitter cover and insert batteries.
Attention: always replace both the batteries
OPERATING CONTROL
❶
❷
❸
❹
❺
Shotgun Microphone input, XLR-3F socket (balanced)
OLED display
OFF button
ON/SEL button
DOWN button
❻
UP button
❼ LED indicator
❽ CH/GAIN button
❾ Battery compartment cover
❼
❷
❽
❸
❹
❺
❾
❻
❶
3