Download SPAN-IGM User Manual

Customer Support
NovAtel Knowledge Base
If you have a technical issue, browse to the NovAtel Web site at www.novatel.com then select Support |
Helpdesk and Solutions | Search Known Solutions. Through this page, you can search for general
information about GNSS and other technologies, information about NovAtel hardware and software, and
installation and operation issues.
Before Contacting Customer Support
Before contacting NovAtel Customer Support about a software problem perform the following steps:
1. Log the following data to a file on your computer for 15 minutes:
RXSTATUSB once
RAWEPHEMB onchanged
RANGECMPB ontime 1
BESTPOSB ontime 1
RXCONFIGA once
VERSIONB once
RAWIMUSXB onnew
INSPVASB ontime 1
INSCOVSB ontime 1
INSUPDATEB onchanged
IMUTOANTOFFSETSB onchanged
2. Send the file containing the log to NovAtel Customer Support, using either the NovAtel FTP site at
www.novatel.com/support/firmware-software-and-manuals/ftp-site/ or through the
[email protected] e-mail address.
3. You can also issue a FRESET command to the receiver to clear any unknown settings.

The FRESET command will erase all user settings. You should know your configuration and
be able to reconfigure the receiver before you send the FRESET command.
If you are having a hardware problem, send a list of the troubleshooting steps taken and results.
Contact Information
Use one of the following methods to contact NovAtel Customer Support:
Call the NovAtel Hotline at 1-800-NOVATEL (U.S. & Canada)
or +1-403-295-4500 (international)
Fax: +1-403-295-4501
E-mail: [email protected]
Web site: www.novatel.com
SPAN-IGM User Manual Rev 2
Write:
NovAtel Inc.
Customer Support Department
1120 - 68 Avenue NE
Calgary, AB
Canada, T2E 8S5
7