Download USER MANUAL

AV and SCART SETUP
VIDEO SETTING MENU
The menu setup of AV/SCART modes is much the same as that of TV mode, except the
"
" section is invalid and a bit difference in sound mode. It is not repeated here.
You can find it in preceding pages.
NOTE
If no signal input in TV, AV, SCART the screen will show a similar signal to the
following figure.
This unit will go into standby mode automatically
with no signal input for 5 minutes.
AV
NO SIGNAL
4:50
If the input channel is SCART, this unit will automatically recognise RGB or CVBS
signal of SCART; when normal RGB signal appears, this unit will automatically switch
into RGB display mode. For this unit is combined by multiple functions, when inserting
into SCART socket, it will not automatically switch into SCART mode. You have to
select SCART channel through [SOURCE] menu, that is a little difference with that of
others TV set.
17