Download Door Interlock Installation Instructions

DOOR INTERLOCK SYSTEM – INSTALLATION MANUAL
_________________________________________________________________________________________________________________________________________________
24vdc
0v
2. FIELD WIRING
A. Each interlocked door in the system has a Master
interlock module. Each master module requires six
cores to be run from the control panel to each master
module. The cable should be rated at 24vdc and
matched to the fuse size installed on the PCB.
IN
+
1
2
3
4
5
6
ON
D4
+
1
2
3
4
5
6
ON
J4
ON
D3
J3
1
2
3
4
5
6
J2
J
IN
ON
ON
24VDC
0v
03
24VDC DOOR INTERLOCK SYSTEM
03
Terminal 1
Terminal 2
Terminal 3
Terminal 4
Terminal 5
Terminal 6
24VDC
+
1
2
3
4
5
6
NAIS
TK1 - 24V
ATK104
JAPAN
T5
CONTROL PANEL
00707
T4
1 2 3 4 5 6
53W/5
0313 A
MALAYSIA
J1
FIELD WIRING (To each interlocked door)
ON
–
–
–
–
–
–
PRESS TO
RESET
D2
+
six core signal cable 1 Amp rated
IN
D4
IN
196-6298
Terminal 1
Terminal 2
Terminal 3
Terminal 4
Terminal 5
Terminal 6
(Door 1)
IN
D3
IN
+
RS
Master Interlock Module
(Door 1)
D2
IN
J5 J6
D1
1 2 3 4 5 6
Control Panel
MASTER INTERLOCK MODULE
3840R
B. Each six way terminal mounted on the distribution
board within the power supply panel is for each
interlocked door set. Terminations should be
connected as follows:-
D1
IN
53W/5
0313 A
MALAYSIA
7 8 9 10
Repeat the above wiring for each door in the system.
If the master module does not have a slave module or remote
override connected to it switch J1 to the ON position.
MASTER
_________________________________________________________________________________________________
technickon ltd, Unit 7, Boxmend Industrial Estate, Bircholt Road, Parkwood, Maidstone, Kent, ME15 9YG
tel: (01622) 673300 fax: (01622) 673311
email: [email protected] web: www. technickon.co.uk
-3-