Download User Manual - securi
Transcript
JANUS-lite User Manual Override timeouts These should only be changed in very specific circumstances, e.g. if the door is used for disabled access, the 'open time' should be altered accordingly. Entering a new override timeout 1. Ensure the correct database is displayed. 2. Select Override Timeouts then New. Timeout list 3. Choose the Controller from the drop down list. 4. Select Dev Type from the list, e.g. Door, Reader. 5. Select the Dev No. from the list. 6. Select a value for the Timer from the list (see note). 7. Enter a value for the Period. 8. Select Accept to save. Edit timeout 9. Repeat steps 2 to 8 for all Override Timeouts required. Select Done. The choices available in the Timer menu are dependent on the Dev Type (hardware) selected. 40 PM002R03 Grosvenor Technology Ltd. 2001