Download USER MANUAL

VHSDIR-870EXT-IP
User Manual
Procedure
• To change the Channel Name, configure it as needed and then click the
Set button next to the Channel Name
• To change the Video System Frequency, select the desired setting under
video system and then click the Set button.
5.6.4 Date & Time
Description
The Date and Time page allows you to configure the camera’s date and time,
shown in Figure 5-10
Figure 5-10 Date and Time
Procedure
You can set the camera’s date and time in the following ways:
• Using a NTP server (recommended)
• Using your computer’s system time
• Manually
Issue V1.1
The camera is configured to use NTP by
default, but you must set the time zone
and daylight savings time settings to
ensure an accurate time. After a power
failure, the camera is configured to
connect to an NTP server and
automatically update the time when
power is restored. If using another
method to set the camera clock, time
must be manually updated after a power
failure.
36