Download User's Manual

5-2 Daily Care
Care of the Detection Pin
Carry out daily care for the detection pin. The presence of rust or grime on the detection pin makes
accurate detection impossible, which in turn may make it impossible to perform cutting as intended,
and may even damage the machine.
Care, Maintenance, and Storage Methods
 After use, wipe clean using a clean cloth, apply rust-preventive oil generously, and store.
 When the item will be out of use for a prolonged period, store in a location with low humidity and
little fluctuation in temperature.
Replacing the Center Drill
Tighten
Loosen
Hexagonal driver
(included with the modeling
machine)
The center drill is fitted with a bit at each
end. When the one in
use becomes worn,
reverse the orientation
and reinstall. When
both ends become
worn, then replace.
Chapter 5 Appendix
49