Download PLAN-G USER MANUAL

Plan G User Manual
V 2.05 March 2011
IPv6 is available in Windows Vista and Windows 7, and may be installed in Windows XP if you wish. You need to Enable the one you want to use by making sure the line: <Disabled>False</Disabled>
is present. For the other Elements, you can change the line to: <Disabled>True</Disabled>
but this isn’t essential. Plan‐G will use the protocol set in Global Options. For Ipv6 connections. Note that <Scope> needs to be set to link-local not global 21.1 Example 1
This example contains four “Profiles”, one for a local pipe connection, two for remote (network) IPv6 connections and one for a remote IPv4 connection. Note that the Pipe protocol cannot be used for networked connections. <!-- Example Local Pipe Server Configuration-->
<?xml version="1.0" encoding="Windows-1252"?>
<SimBase.Document Type="SimConnect" version="1,0">
<Descr>SimConnect Server Configuration</Descr>
<Filename>SimConnect.xml</Filename>
<Disabled>False</Disabled>
<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>Pipe</Protocol>
<Scope>local</Scope>
<MaxClients>64</MaxClients>
<Port></Port> Å--THE PORT IS GIVEN NO VALUE
</SimConnect.Comm>
<!-- Example Global (remote) IPv6 Server Configuration-->
<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>IPv6</Protocol>
<Scope>link-local</Scope>
<MaxClients>64</MaxClients>
<Address>fe80::5974:d93:646d:a902</Address>
<Port>4506</Port>
</SimConnect.Comm>
<!—2nd Example Global (remote) IPv6 Server Configuration-->
<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>IPv6</Protocol>
<Scope>link-local</Scope>
Page 99 of 106