Download USER MANUAL

The lever for air distribution flap
control flap is pushed to the unit
Figure 3.8. Side view of the lever for controlling air distribution flap of hot air
pellet stove , model “Pony PS9D” . In the given position of the lever (the lever is
pushed to the grill) the air flap is closed and to another room the hot air flow
rate is minimized;
The lever for air distribution flap control
flap is pulled out from the unit
Figure 3.9. Side view of the lever for controlling air distribution flap of hot air
pellet stove , model “Pony PS9D” . In the given position of the lever (the lever is
pulled from the grill) the air flap is opened and to another room the hot air flow
rate is maximized;
NOTE : the heat by the stove air is force convected by a centrifugal fan, which
is installed section on the basis of the heat exchanger. So in case of change of
the position of the lever for controlling the position of the air distribution flap,
the room, where the stove is installed, continues to receive heat energy, mainly
by radiation and natural convection;
Page. 20/64