Download User Guide Version 6.1 - Opal-RT

ARTEMiS Stubline
Figure 9: Stublines usage in RT-LAB to decouple compuational task on several cores/CPUs
See the artemis_Transfo_StublineRT.mdl demo for details on how to use the stublines to
decouple and simulate such a model on several cores/CPUs in RT-LAB.
Limitations
Usage in RT-LAB as task decoupling elements
When used in RT-LAB to decouple and separate computational tasks on different cores/CPUs,
the following connection restriction are applicable to the ARTEMiS Stubline model:
1- The ARTEMiS Stubline must be located on the top-level of the RT-LAB compatible Simulink
model (as in Figure 9 for example)
2- Each ARTEMiS Stubline outports can be connected only to SimPowerSystems component
located inside RT-LAB top-level subsystem (names beginning with ’SS’ or ’SM’ prefixes)
3- No connection between stublines is allowed on the top-level. If such a connection is
required (ex: star-connection neutral point), the ARTEMiS Stubline lines must be first routed
inside the subsystems individually and the connection between the ARTEMiS Stubline ports
can be made inside the subsystem.
Related Items
OpReplaceSpsBlocks, ARTEMiS Guide, ARTEMIS Distributed Parameters Line
75
Q042010-03
ARTEMIS User Guide