Download GE865 Harware User Guide
Transcript
GL865 Hardware User Guide 1vv0300910 Rev.7 – 2014-04-02 12.3. Debug of the GL865 in production To test and debug the mounting of the GL865, we strongly recommend to foreseen test pads on the host PCB, in order to check the connection between the GL865 itself and the application and to test the performance of the module connecting it with an external computer. Depending by the customer application, these pads include, but are not limited to the following signals: pin 38, 37 32, 33, 35, 36, 46 7 8 5 43 47 45 44 signal VBATT & VBATT_PA GND TXD RXD RTS V_AUX / PWRMON RESET* TX_AUX RX_AUX Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 65 of 76