Download CommandCenter Secure Gateway User Guide

CHAPTER 3: CONNECTING TO AND USING NODES VIA THE CC-SG DIRECTOR CLIENT
13
Interface Status
Each node has one or more interfaces through which you can connect to the node. You can see
whether an interface is available by checking the Availability column in the Node Profile’s
Interface section. the in are several status
AVAILABILITY
MEANING
Idle
The interface is not in use.
Connected
The interface is in use, but it is available to additional users.
Busy
The interface is busy and cannot accept any additional users.
Note: KX 1.4 devices do not use the “Busy” Availability category, as described above. If a KX
1.4’s interface displays the “Connected” Availability category, the interface may be either
Connected or Busy.
Connect to Nodes
Once interfaces have been configured for each node, you are ready to connect to these nodes and
manage them through the applications they have been configured with, for example, Raritan
Console (RC), Raritan Serial Console (RSC), Raritan Remote Client (RRC), or Multi-Platform
Client (MPC) application.
Connect to a Node via a Serial Interface
1. In the Nodes tree, select the node you want to connect to and manage. The Node Profile
screen appears.
Figure 9 Node Profile Screen—Serial Interface
2. In the Node Profile screen, all configured interfaces display in the Interfaces section.
3. In the Name column, click the hyperlink of the serial interface you want to use to connect to
the node.