Download Operating Instructions VEGAPULS 68

6 Set up with the display and adjustment module
signalsuppression,user-programmedlinearizationcurve,measured
value memory as well as event memory remain untouched. The
linearizationissettolinear.
False signal suppression: Deleting a previously created false signal
suppression. The false signal suppression created in the factory
remains active.
Peak values measured value: Resetting of the measured min. and
max. distances to the actual measured value.
The following table shows the default values of the instrument. Depending on the instrument version, not all menu items are available or
differentlyassigned:
Menu
Menu item
Default value
Setup
Measurement
loop name
Sensor
Medium
Liquid/Water
Application
Storage tank
Vessel form
Vessel bottom, dished boiler end
Vesell height/
Measuring range
Recommended measuring range, see
"Technicaldata" in the supplement
Min. adjustment
Recommended measuring range, see
"Technicaldata" in the supplement
Max. adjustment
0,000 m(d)
Damping
0.0 s
Current output
mode
4 … 20 mA, < 3.6 mA
Current output
Min./Max.
Min. current 3.8 mA, max. current
20.5 mA
36535-EN-140209
Display
VEGAPULS 68 • 4 … 20 mA/HART two-wire
Bulk solids/Crushed stones, gravel
Silo
Vessel top, dished boiler end
Block adjustment
Released
Language
Like order
Displayed value
Distance
Display unit
m
Scalingsize
Volume
Scaling
0.00 lin %, 0 l
Backlight
Switchedoff
l
100.00 lin %, 100 l
51