Download CAL-2000 Operating Instructions

1: Setup
Unpacking the DH-2000
► Procedure
1. Unpack your lamp assembly and power supply carefully. Although the lamp is rigidly mounted,
dropping this instrument can cause permanent damage.
2. Inspect the outside of the instrument and make sure that there is no damage. Do not use the
instrument if damage is present.
3. Use this instrument in a clean laboratory environment (see Operating Environment).
Contents
Your DH-2000 package should contain the following:
DH-2000 unit
Power cord
One IC-DB15-2 interface cable for shutter operation (DH-2000-S, DH-2000-BAL, DH-2000FHS, DH-2000-S-DUV-TTL, and D-2000-S models only)
UV safety goggles
Connecting the Fiber Optic Cable
Use the following procedure to connect the cable to the lamp.
2
000-10000-025-02-1105