Download Installation manual

Jaw chuck B-Top3. Structure and function
english
Chuck SPANNTOP Adapt
 the CENTREX quick change-over interface allows a
μ-precise clamping of the add on clamping elements to the jaw chuck B-Top3 without adjusting.
 Possible clamping range Ø 4 - 100 mm
 Parallel and circumferential clamping
 Work piece stabilization by axial traction against
the workpiece stop
 high stiffness and low wear
The SPANNTOP Adapt can be ordered from HAINBUCH.

Fig. 6
4.2.5 Grease
Fig. 7
The universal grease for chuck and mandrel lubrication
is supplied in a 1000g can. The order number for the
universal grease is 2085/0003; it can be ordered from
HAINBUCH.
4.2.6 Grease gun
Fig. 8
The grease gun is filled with universal grease, which is
pressed into the clamping device. The grease gun has a
pointed mouthpiece. The order number for the grease
gun is 2086/0004; it can be ordered from HAINBUCH.
Order Hotline +49 [0]7144. 907-333
21