Download Internet Setup Manual - Heat

•Name the service to reflect the Platinum
control Internet ID setting as shown.
•Under the Starting Port and Ending
Port, enter the same port as per the
setting of the Platinum control. See
“Port Forwarding Table” on page 7
•The Service Type can be set to either
TCP/UDP or TCP.
•The IP Address should correspond
to the Platinum control Internet ID
setting. Example; if the Platinum
control Internet ID was set to ‘2’, the
Server IP Address should be set to
‘192.168.1.102’.
•Click the Apply button.
•Proceed to “Testing Control
Communication” on page 15
12 Platinum Internet Setup and Installation