1
Download ProSafe Managed Switch Command Line Interface (CLI) User Manual
Transcript
ProSafe Managed Switch no lacp actor admin state passive Use this command to set the LACP actor admin state to active. Format no lacp actor admin state passive Mode Interface Config lacp actor port priority Use this command to configure the priority value assigned to the Aggregation Port. The valid range for <priority> is 0 to 255. Default 0x80 Format lacp actor port priority <priority> Mode Interface Config Note: This command is only applicable to physical interfaces. no lacp actor port priority Use this command to configure the default priority value assigned to the Aggregation Port. Format no lacp actor port priority Mode Interface Config lacp actor system priority Use this command to configure the priority value associated with the LACP Actor’s SystemID. The range for <priority> is 0 to 65535. Default 32768 Format lacp actor system priority <priority> Mode Interface Config Note: This command is only applicable to physical interfaces. Switching Commands 122
