Download GNU FreeIPMI User's Guide

Chapter 7: sensors
Record ID: 59
Sensor type: Crit Int Status (Critical Interrupt)
Sensor number: #7
Event/Reading type code: 6Fh
Hysteresis +ve: 0
Hysteresis -ve: 0
Front Panel NMI/Diagnostic Interrupt: [OK]
Bus Timeout: [OK]
I/O channel check NMI: [OK]
Software NMI: [OK]
PCI PERR: [OK]
PCI SERR: [OK]
EISA Fail Safe Timeout: [OK]
Bus Correctable Error: [OK]
Bus Uncorrectable Error: [OK]
Fatal NMI (port 61h, bit 7): [OK]
Record ID: 60
Sensor type: EVT Log Disabled (Event Logging Disabled)
Sensor number: #9
Event/Reading type code: 6Fh
Hysteresis +ve: 0
Hysteresis -ve: 0
Correctable Memory Error Logging Disabled: [OK]
Event ‘Type’ Logging Disabled: [OK]
Log Area Reset/Cleared: [OK]
All Event Logging Disabled: [OK]
SEL Full: [OK]
SEL Almost Full: [OK]
Record ID: 61
Sensor type: System Event (System Event)
Sensor number: #10
Event/Reading type code: 6Fh
Hysteresis +ve: 0
Hysteresis -ve: 0
System Reconfigured: [OK]
OEM System Boot Event: [OK]
Undetermined system hardware failure: [OK]
Entry added to Auxiliary Log: [OK]
PEF Action: [OK]
Record ID: 62
Sensor type: Int SCSI TERMV0 (Voltage)
Sensor number: #96
Event/Reading type code: 06h
41