Download Internal Memory (RAM and ROM) User Guide
Transcript
Clocking Modes and Clock Enable Page 11 Clocking Modes and Clock Enable Altera memory supports various types of clocking modes depending on the memory mode you select. Table 6 shows the supported types of clocking modes in most Altera devices. Table 6. Supported Types of Clocking Modes in Most Altera Devices Single-port RAM Simple Dual-port RAM True Dual-port RAM Tri-port RAM Single-port ROM Dual-port ROM Single clock v v v v v v Read/Write X v X v X X Input/Output v v v v v v Independent X X v X X v Clocking Modes 1 Asynchronous clock mode is only supported in MAX series of devices, and not supported by Stratix and newer devices. However, Stratix III and newer devices support asynchronous read memory for simple dual-port RAM mode if you choose MLAB memory block with unregistered rdaddress port. In the single clock mode, a single clock can be used together with a clock enable to control all registered ports or selected registered ports of the memory blocks. In the read/write clock mode, a separate clock is available for each read and write port. The read clock controls all the registered read ports (data output, read address, and read-enable ports) and the write clock controls all the registered write ports (data input, write address, write enable, and byte enable ports). In input/output clock mode, a separate clock is available for each input and output port. The input clock controls all registered input ports (data input, addresses, byte enables, read enables, and write-enables ports) to the memory and the output clock controls the output registered ports (data output). In the independent clock mode, a separate clock is available for each port (A and B). Clock A controls all registered ports of port A, while clock B controls all registered ports of port B. 1 © November 2009 You can create independent clock enable for different input and output registers to control the shut down of a particular register for power saving purposes. From the MegaWizard interface, click More Options (beside the clock enable option) to set the available independent clock enable that you prefer. Altera Corporation Internal Memory (RAM and ROM) User Guide