Download ASTRA V User's Guide

Working With Procedures
Working with Procedure Graphs
A number of procedure dialogs contain graphs. You can manipulate these
graphs in the following ways:
•
Select Detectors or Data: If there is a list of detectors or data
sources above or to the right of the graph, you can use checkmarks to
indicate the data you want to view. Some graphs can display multiple
data sets in different colors (for example, collection). Others display
only one data set at a time (for example, defining baselines).
•
Zoom In: Hold down the
Ctrl key and your left
mouse button. Drag a rectangle around the data you
want to view larger. Or,
press Ctrl+F5 to zoom in.
Press F5 to open the Scale
Graph dialog.
•
Zoom Out: Hold down the Ctrl key and click your right mouse button.
Each click undoes one zoom in action. Alternately, you can press
Ctrl+Shift+F5 to zoom out one level.
•
Edit: You can modify a variety of aspects of a graph’s styles by doubleclicking a graph and using the Edit Graph dialog.
This dialog has the following fields:
Table 8-1: Edit Graph Fields
Field
Description
Marker Size
Choose the marker size you want to use. The options are: very small, small,
medium, and large. Use Marker Size for lines made up of individual data points;
use Line Point Size for fitted curves.
Line Point Size
Set the width of the line when the line is a fitted curve. Use Marker Size if the
line is made up of individual data points.
Series
Choose the data series for which you want to change the color or marker type.
M1000 Rev. H
8-5