Download en USER GUIDE

11.6.2 Recording attendance with two different reference finger scans per user
Step
1st
2nd
Instruction
Register (enroll) two reference finger scans for each user.
Assign an event to the finger that is to be used for access. This event must rely on the
Access ACTION CODE, e.g., Open door with finger . In this way, the user can signal that
they are present.
3rd
Assign the previously defined exit event to the finger that is to be used for exiting the
building. In this way, the user can signal that they are absent.
11.6.3 Recording attendance with one reference finger scan per user
Provide a finger scanner for the sole purpose of recording attendance/absence based on one
reference finger scan. This finger scanner is not responsible for any other task.
Each user can use any finger scanner within the system for which they are authorized to signal that
they are present. The only exception in this regard is the finger scanner they use to signal their
absence.
Step
1st
Instruction
Create a customized device template. This converts the Open door with finger event into
the exit event that you created previously.
2nd
Assign the device template that you have just created to the finger scanner that is
responsible for recording when a user exits. This finger scanner will then perform the exit
event for all those assigned reference scans that have the Open door with finger event
assigned to them.
See Creating a customized device template, page 65.
11.6.4 Working with the attendance list
The attendance list shows which system users are present. It can be accessed in the DATA menu
and in the STATUS menu via Show attendance list. If you have defined a password for logging
control, the dialog for entering it appears.
See Defining/changing the logging control password, page 73.
en│84