Download en USER GUIDE

NAME OF THE DEVICE
Define the display name for the control panel.
DEVICE TYPE
Specify whether this device is to be based on the default device
template or a customized one.
See Creating a customized device template, page 65.
Step
1st
Instruction
Assign a name to each of the devices found.
2nd
If necessary, change the device type.
3rd
Press Finish to complete the search process.
10.6.4.2 Adding a control panel
Fig. 36:
ekey net admin: Control panel: Add control panel: Edit control panel : Properties
The Add control panel function allows you to create a control panel manually.
NAME
Define the display name for the control panel.
DESCRIPTION
Define a description text.
INTERNAL ID
Shows a non-editable numerical value that is defined by the
system. Each object in the system has its own unique ID.
DEVICE TYPE
Specify whether this device is to be based on the default device
template or a customized one.
CONTROL PANEL SERIAL
NUMBER
If you are performing the configuration process manually, enter
the serial number here. You will find the serial number on the
label attached to the device. This unique number consists of
fourteen numeric characters.
TIME ZONE RELAYS 1-4
The relays available here (up to a maximum of four) depend on
the type of control panel. You can assign one time zone to each
relay. This causes the relay to switch automatically. You can only
assign time zones for which the USE TIME ZONE FOR TIMECONTROLLED OPERATION option has been enabled.
See Time zone, page 52.
See Automatic time-controlled operation for a control panel page 89.
en│42