1
Download CNC 8055 - Installation manual
Transcript
SOFTWARE OPTIONS OF THE 8055 AND 8055I CNCS. About the product Model GP M MC MCO EN T TC TCO Number of axes with standard software 4 4 4 4 3 2 2 2 Number of axes with optional software 7 7 7 7 ----- 4 or 7 4 or 7 4 or 7 Electronic threading ----- Stand. Stand. Stand. Stand. Stand. Stand. Stand. Tool magazine management: ----- Stand. Stand. Stand. ----- Stand. Stand. Stand. Machining canned cycles ----- Stand. Stand. ----- Stand. Stand. Stand. ----- Multiple machining ----- Stand. Stand. ----- Stand. ----- ----- ----- Solid graphics ----- Stand. Stand. Stand. ----- Stand. Stand. Stand. Rigid tapping ----- Stand. Stand. Stand. Stand. Stand. Stand. Stand. Tool live monitoring ----- Opt. Opt. Opt. Stand. Opt. Opt. Opt. Probing canned cycles ----- Opt. Opt. Opt. Stand. Opt. Opt. Opt. Stand. Stand. Stand. Stand. Stand. Stand. Stand. Stand. Opt. Opt. Opt. Opt. ----- Opt. Opt. Opt. Profile editor Stand. Stand. Stand. Stand. ----- Stand. Stand. Stand. Tool radius compensation Stand. Stand. Stand. Stand. Stand. Stand. Stand. Stand. Tangential control Opt. Opt. Opt. Opt. ----- Opt. Opt. Opt. Retracing ----- Opt. Opt. Opt. Stand. Opt. Opt. Opt. Stand. Stand. Stand. Stand. Stand. Stand. Stand. Stand. Irregular pockets with islands ----- Stand. Stand. Stand. ----- ----- ----- ----- TCP transformation ----- Opt. Opt. Opt. ----- ----- ----- ----- C axis (on Lathe) ----- ----- ----- ----- ----- Opt. Opt. Opt. Y axis (on Lathe) ----- ----- ----- ----- ----- Opt. Opt. Opt. Telediagnosis Opt. Opt. Opt. Opt. Stand. Opt. Opt. Opt. DNC COCOM version Setup assistance CNC 8055 CNC 8055i ·10·
