1
Download CNC 8055 - Installation manual
Transcript
Installation manual Work levels for sinusoidal signal (only for axes). A and B signals Amplitude: 0.6 ÷ 1.2 Vpp Centered: |V1-V2| / 2 Vpp =< 6,5% Relationship: VApp / VBpp = 0.8 ÷ 1.25 Phase shift: 90º ± 10º Reference mark (I0) Amplitude: 0.2 ÷ 0.85 V Width: T-90º =< I0 =< T+180º CNC structure Maximum frequency 500 kHz. CNC 8055I CONFIGURATION 2. Feedback input for the handwheels Power supply consumption of +5 V 1 A (250 mA per axis). Work levels for differential square signal. Maximum frequency: 400 kHz. Maximum gap between flanks: 460 ns. Phase shift: 90º ± 20º. Vmax in common mode: ± 7 V. Vmax in differential mode: ± 6 V. Hysteresis: 0.2 V. Maximum differential input current: 3 mA. Work levels for non-differential square signal. Maximum frequency: 400 kHz. Maximum gap between flanks: 460 ns. Phase shift: 90º ± 20º. High threshold (logic level "1") VIH: 1,25 V < VIH < 7 V. Low threshold (logic level "0") VIL: -7 V < VIL < 1 V. Vmax: ± 7 V. Hysteresis: 0.25 V. Maximum differential input current: 3 mA. CNC 8055 CNC 8055i SOFT: V01.6X ·79·
