Download User's Manual (Monitoring Tool)

Archive interface:
Only for administrators
Do not use (users)
All radiation levels are available by
clicking on the “Start” button
Figure 1
Export/Plot Data Interface:
You can choose “by code” or “by date”
(The code related to the user’s test can
be found here)
1
Choose your Test Code from the list (a
function research is available for
example directly finding the desired
code.
2
3
Here you will see more detail on the test
and equipment.
4
Select the value (or values) that you
want to export in a .csv file or plot using
the interface.
5
6
After the configuration of all the items
you can export or display the data.
6
Select if you want to see the different
configurations shields and targets on the
charts.
To use the “Refresh” button, first close all
the charts which have been plotted and then
use theFigure
refresh2button to visualize the
different facility configurations on the
charts.
(In this case you don’t need to press the
“Plot” button again, only the “Refresh”
button is useful).