Download Vigor2930 Series Dual-WAN Security Firewall User's Guide

setting.
Play dial tone only when account registered - Check this
box to invoke the function.
FXO Feature
Enable ISDN to VoIP (On-Net) Calls – Check this box to
make all the outgoing calls from ISDN line to be forwarded to
receivers by Internet.
Enable VoIP to ISDN (Off-Net) Calls –Check this box to
make all the incoming calls coming from Internet to be
forwarded to receivers by ISDN line.
Loop Through to Phone Port – Choose this radio button to
make all the calls controlled by traditional PSTN phone. It
will tack effect only if MSN mapping ring port is not
configured. In addition, you can specify which port (both
phone 1 and phone 2, phone 1 only or phone 2 only) will ring.
Loop Through to ISDN1-S0 Port – Choose this radio button
to make all the calls controlled by ISDN line.
In addition, you can press the Advanced button to configure tone settings, volume gain,
MISC and DTMF mode. Advanced setting is provided for fitting the telecommunication
custom for the local area of the router installed. Wrong tone settings might cause
inconvenience for users. To set the sound pattern of the phone set, simply choose a proper
region to let the system find out the preset tone settings and caller ID type automatically. Or
you can adjust tone settings manually if you choose User Defined. TOn1, TOff1, TOn2 and
TOff2 mean the cadence of the tone pattern. TOn1 and TOn2 represent sound-on; TOff1 and
TOff2 represent the sound-off.
Region
134
Select the proper region which you are located. The common
settings of Caller ID Type, Dial tone, Ringing tone, Busy
tone and Congestion tone will be shown automatically on the
page. If you cannot find out a suitable one, please choose
User Defined and fill out the corresponding values for dial
tone, ringing tone, busy tone, congestion tone by yourself for
VoIP phone.
Vigor2930 Series User’s Guide