Download GPS AutoSteer System Installation Manual

Transcript
Normal Front Axle Mounting
8. Loosen the four bolts holding the mudguard to the mudguard support using a 19mm socket ratchet and extension.
Note: Do not completely remove bolts. See Figure 3-9.
Figure 3-9
Loosen Mudguard Support Bolts
Mudguard Bolts
9. Loosen the mudguard bolts enough to get the mudguard support bolts out.
10. Remove the two front mudguard support bolts using a 24mm socket and breaker bar. See Figure 3-10.
Figure 3-10 Remove Bolts from the Mudguard Support
Hardware Installation Manual
63