Download Matrox DigiSuite DTV Installation Manual

DigiSuite DTV Connectors
This appendix provides signal information for the connectors on DigiSuite DTV
and its associated optional digital module.
A
p
p
e
n
d
i
x
B
106
DigiSuite DTV connector overview
The following diagram shows the location of the connectors on DigiSuite DTV:
Movie-2 bus connectors
90 Pins
26-pin
video bracket
connector
70 Pins
DigiSuite DTV
26-pin
audio bracket
connector
PCI bus connector
Digital module connector overview
The following diagram shows the location of the connectors on the optional digital module for
DigiSuite DTV:
Internal power
connectors
Movie-2 bus connector
Digital video
bracket
connector
Digital audio
bracket
connector
Appendix B, DigiSuite DTV Connectors
Digital module
Video/audio cable
107
Analog video I/O
1
9
10
18
19
26
# Description
# Description
Ground
Y1† or Composite1††† In
Ground
Preview Out Composite
Ground
Program Out Composite
Ground
1.
2.
3.
4.
5.
6.
7.
C1† or (B-Y)†† In
Ground
Y2† or Y†† or Composite 2††† In
Ground
Preview Out Y
(Key plug)
Program Out (B-Y)
10.
11.
12.
13.
14.
15.
16.
8. Program Out C† or (R-Y)†† 17. Ground
9. Ground
18. Key Out
† When
# Description
C2† or (R-Y)†† In
Ground
Reference In
Reference Out (loop-through)
Preview Out C
Ground
Program Out Y
(Component and Y/C)
26. Ground
19.
20.
21.
22.
23.
24.
25.
configured as an Y/C input.
†† When configured as an analog component video input.
††† When configured as a composite input.
Digital video (SDI) I/O (optional)
A1
A2
1
A3
3
#
Signal
2
4
A4
5
#
Signal
A1. SDI IN
1. REF IN RETURN
A2. (Not connected)
2. REF LOOP OUT RETURN
A3. SDI MAIN OUT
3. REF IN
A4. SDI KEY OUT
4. (Not connected)
5. REF LOOP OUT
Note
q
The pins identified as “RETURN” (pins 1 and 2) must be connected to the shell.
Analog video I/O
108
Analog audio I/O
1
9
18
10
26
# Signal
1.
2.
3.
4.
5.
6.
7.
8.
9.
Out 3 (–) or Signal Shield
GND
Out 1 (+) or Line Out 1
GND
GND
In 4 (–) or Signal Shield
In 3 (+) or Line In 3
In 3 (–) or Signal Shield
(Key plug)
19
# Signal
10.
11.
12.
13.
14.
15.
16.
17.
18.
Out 3 (+) or Line Out 3
Out 4 (+) or Line Out 4
Out 1 (–) or Signal Shield
(Key plug)
(No connection)
In 4 (+) or Line In 4
GND
GND
In 2 (+) or Line In 2
19.
20.
21.
22.
23.
24.
25.
26.
GND
Out 4 (–) or Signal Shield
Out 2 (+) or Line Out 2
Out 2 (–) or Signal Shield
GND
In 1 (–) or Signal Shield
In 1 (+) or Line In 1
In 2 (–) or Signal Shield
Notes
q
q
When two signal types are provided, the first applies to balanced lines and the second, to
unbalanced lines.
On balanced lines, pins identified as “GND” should be unconnected.
Digital audio I/O (optional)
1
6
10
11
# Signal
1.
2.
3.
4.
5.
Digital Audio Out 1 (+)
Digital Audio Out 2 (-)
(Grounded)
(Grounded)
(Grounded)
5
15
# Signal
6.
7.
8.
9.
10.
(Grounded)
Digital Audio Out 2 (+)
Digital Audio In 1 (-)
Digital Audio In 2 (-)
(Grounded)
11.
12.
13.
14.
15.
Notes
q
q
All shields must be connected to the chassis via the shell.
All pins identified as “Grounded” should be connected to the shell.
Appendix B, DigiSuite DTV Connectors
Digital Audio Out 1 (-)
Digital Audio In 1 (+)
Digital Audio In 2 (+)
(Grounded)
(Grounded)