Download CodeVisionAVR User Manual

CodeVisionAVR
2.4.6 Serial Communication Terminal Setup
The serial communication Terminal is configured using the Settings|Terminal menu command.
In the Terminal Setup window you can select the:
• computer's communication port used by the Terminal: COM1 to COM6;
• Baud rate used for communication: 110 to 115200;
• number of data bits used in reception and transmission: 5 to 8;
• number of stop bits used in reception and transmission: 1, 1.5 or 2;
• parity used in reception and transmission: None, Odd, Even, Mark or Space;
• type of emulated terminal: TTY, VT52 or VT100;
• type of handshaking used in communication: None, Hardware (CTS or DTR) or Software
(XON/XOFF);
• possibility to append LF characters after CR characters on reception and transmission;
• enabling or disabling the echoing of the transmitted characters.
Changes can be saved, respectively canceled, using the OK, respectively Cancel buttons.
© 1998-2003 HP InfoTech S.R.L.
Page 52