Download USER MANUAL

OSD Menu Functions
Display / Picture / PIP-PBP Adjustment / PIP Picture / Sharpness
To enable this function, please see [ Display / Source / xxx / xxx ] later in this section of the manual.
Increase/decrease the overall image sharpness. This will not change the sharpness of the Main Source
signal behind the window overlay. Use it to increase the visual quality of signals from possible older
equipment or electronically weak signals.
● Level adjusts from 0-15 steps. 7 is default.
Display / Picture / PIP-PBP Adjustment / PIP Picture / Color
This function only apply for analog VIDEO IN signals.
To enable this function, please see [ Display / Source / xxx / xxx ] later in this section of the manual.
Increase/decrease the overall video color saturation/color amount. Can be used if the incoming signal from
older equipment or bad cables appear to have a lack of strong colors. This will not change the color
saturation/intensity of the Main Source signal behind the window overlay. Note that this function can also
make noisy color signals appear crisper/clearer if adjusted to grayscales.
● Level adjusts from 0-100 steps. 50 is default.
Display / Picture / PIP-PBP Adjustment / PIP Picture / Tint
This function only apply for analog VIDEO IN signals.
To enable this function, please see [ Display / Source / xxx / xxx ] later in this section of the manual.
Increase/decrease the overall video tint (applies only for NTSC video signals.). This will adjust all colors
brighter or darker which makes the image more “washed out” or stronger in terms of color intensity. Can be
used if the incoming signal from older equipment or bad cables appear to have a lack of strong colors. This
will not change the color tint of the Main Source signal behind the window overlay.
● Level adjusts from 0-100 steps. 50 is default.
Display / Picture / Advanced Settings / Color Temperature / xx00K
Adjust the color temperature measured in Kelvin degrees. You can choose between 9300K, 8000K, 6500K
and 5000K. This applies to the Main Source signal. Window overlays (PIP/PBP) and the OSD Menu overlay
will be unaffacted. Lower values make the image appear warmer, while higher values will make it appear
cooler. Default is set to 9300K. The Kelvin color temperature scale (approximate and symbolic):
1800K
4000K
5500K
8000K
12000K
● When selected, a box icon ( ▀ ) will indicate that the selected function has been activated.
16000K
Display / Picture / Advanced Settings / Color Temperature / User / RGB
Function only available in “Full” menu mode.
Adjust the color temperature manually. You can adjust the R(red), G(green) and B(blue) levels. This applies
to Main Source signal. The window overlays (PIP/PBP) and the OSD Menu overlay will be unaffected.
● Press the right (►) button to activate each R,G,B level and adjust them separately.
User Controls
IND100064-21
35
INB100036-1 (Rev 15)