1
Download SD5 User Manual Version B
Transcript
Chapter 3 - The Master Screen 3.1.7 Keyboard Help ...................................................................... The Keyboard Help button opens up a display detailing the console control elements which are available via an external keyboard: 3.1.8 F10: Reset FX ........................................................................ Pressing this entry in the System sub-menu will reset the Reverb and Delay FX module audio. This allows, for example, lengthy delay and reverb tails to be killed. To complete the reset, select Yes in the warning pop-up which appears. Note that this will briefly bypass all of the FX units. 3.1.9 F11: Reset Engine ................................................................. Pressing this entry in the System sub-menu will restart the audio engine Note that this will briefly interrupt the audio - do not use this function unless absolutely necessary. 3.1.10 F12: Reset Surfaces ............................................................ Pressing this entry in the System sub-menu will reset all of the worksurface controls. This function will briefly interrupt the audio on the Local I/O only. 3.1.11 Set Date & Time .................................................................. Pressing this entry in the System sub-menu will open the Date and Time window for the console's operating system. 3.1.12 Quit to Windows .................................................................. Pressing this entry in the System sub-menu quits the SD5 console software but leaves windows running. If the session is not saved, pressing Quit to Windows will bring up a warning display. Press Yes to quit without saving, or No to cancel the quit. 3.1.13 Restart .................................................................................. Pressing this entry in the System sub-menu shuts the console’s control computer down and restarts it. If the session is not saved, pressing Restart will bring up a warning display. Press Yes to restart without saving, or No to cancel the restart. 3.1.14 Shutdown ............................................................................ Pressing this entry in the System sub-menu shuts the console’s control computer down. If the session is not saved, pressing Shutdown will bring up a warning display. Press Yes to shut down without saving, or No to cancel the shut down. Note: If the console is Mirrored there is also a Shut Down All option which will automatically shutdown all mirrored consoles 3-4
