Download USER MANUAL

Specifications
- JH 19T14 FUD-xA1-AxAA (LED version)
SPECIFICATIONS
Note: All specifications are subject to change without prior notice!
Please visit www.hatteland-display.com for the latest electronic version.
All specifications are subject to change without prior notice!
TFT Technology:
Physical Considerations:
•
•
•
•
•
• 483.00 (W) x 444.00 (H) x 82.00 (D) mm
• 19.02" (W) x 17.48" (H) x 3.23" (D) inch
• Weight: 11.50 kg (approx)
High Quality TFT with LED Backlight Technology
19.0 inch viewable image size
Active Matrix, Thin Film Transistor (TFT)
MVA Premium™ Technology
Optical Bonding Technology (-AOAA models only)
Signal Terminals:
•
•
•
•
•
•
•
•
TFT Characteristics:
•
•
•
•
•
•
•
•
Native Resolution
Pixel Pitch (RGB)
Response Time
Contrast Ratio
Light Intensity
Viewable Angle
Active Display Area
Max Colors
:
:
:
:
:
:
:
:
1280 x 1024
0.294 (H) x 0.294 (V) mm
20ms (typical), “black” to “white”
1000:1 (typical)
300 cd/m² (typical)
+/- 89 deg. (typical) (Up/Down/Left/Right)
376.32 (H) x 301.056 (V) mm
16.7 million
Supported Signals:
: 1 x 9P D-SUB (female) - RS-232 (COM1)
: 1 x 9P D-SUB (female) - RS-232 (COM Touch Screen)
: 3 x BNC (female) (Composite Video in)
• VSD100692-4
: 1 x 9P D-SUB (female) - RS-232 (COM1)
: 3 x BNC (female) (Composite Video in)
On front bezel - Keypad control (IP66):
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (via external control or SCOM)*
• Hotkeys (left/right - push buttons)
• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator
*Please review "Differences FUD vs MMD units" chapter in User Manual INB100036-3)
Environmental Considerations:
Video Signals (with Multifunction Cable):
• Interlaced NTSC and PAL/SECAM video
• Composite video
• Operating
:
• Storage
:
• IP Rating
:
• Compass Safe Dist. :
Power Specifications:
Multi-power Supply:
• 115&230VAC - 50/60Hz
• 115&230VAC - 50/60Hz + 24 VDC
- JH 19T14 FUD-AA1-AxAA
- JH 19T14 FUD-MA1-AxAA
Available Accessories:
Power Consumption:
Operating
: 100 W (max)
• Cables
= VSD100692-3, VSD100692-4 or customized cables.
• JH MMDBR STD-A1 = Bracket
• JH 19BRD STD-A1 = Mounting Bracket EN60945 Tested
• JH MMDRO STD-A1 = Rotary Bracket
• JH 19TSV STD-A1 = Sun Visor
• JH 19VED STD-A1 = Vesa Bracket
• JH 19TAP STD-A1 = 21" CRT Adapter frame
• JH 19TAP STD-B1 = 21" CRT Custom Adapter frame
• JH 19TWC STD-B1 = Water Cover
*Please see user manual for drawings/measurements.
Typical Type Numbers:
=
=
=
=
Standard
Standard
Standard
Standard
Temperature -15 deg. C to +55 deg. C
Humidity up to 95%
Temperature -20 deg. C to +60 deg. C
Humidity up to 95%
Protection (EN60529): IP66 front - IP20 rear
JH19T14FUD-xA1-AxAA - Std:1.60m Steering:1.05m
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Note: You may connect either AC power or DC power or both. In case both
sources are connected, power will be sourced from the AC input. If AC input
is lost, there will be a uninterrupted switch-over to DC input.
FUD-AA1-AOAA
FUD-AA1-AAAA
FUD-MA1-AOAA
FUD-MA1-AAAA
: 1 x 9P D-SUB (female) - RS-232 (COM1)
• VSD100692-3
User Controls:
640 x 480 (including 640 x 350)
800 x 600 (including 720 x 400)
1024 x 768
1280 x 1024*
1600 x 1200
1920 x 1200
* Recommended for optimum picture quality. (60 Hz only)
19T14
19T14
19T14
19T14
• VSD100692-1
Customized cables are possible to support more built-in signals, like: RS-485, RS-422/
RS-485, Buzzer, ON/OFF, Touch (PS/2), 1 x S-Video IN, Remote External User Controls,
Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths
can be manufactured.
* Recommended for optimum picture quality
JH
JH
JH
JH
x 29p DVI Female (or as RGB IN with adapter)
x 15p HD D-SUB (female)
x 15p HD D-SUB (female) - Clone of RGB IN**
x 160p D-SUB (female) - Also see table below
x TYPE B Conn. (female) Reserved for future use
x Std IEC Inlet
x Std IEC Outlet (5A Max)
x 2p D-SUB Connector (male) - Amphenol FCC17
Available factory standard cables, 30cm [11.81"] in length.
Synchronisation Range:
• Horizontal
: 15,0 kHz to 91,1 kHz
• Vertical
: 60 Hz* to 85 Hz
•
•
•
•
1
1
1
1
1
1
1
1
Multifunction Cable:
Sync Signal:
• Digital separate synchronisation
• Composite synchronisation
• Synchronisation on green.
• Auto detects VGA -> WUXGA, interlaced and non interlaced
• Video Signal
: Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
:
:
:
:
:
:
:
:
:
:
:
:
:
:
**Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the
RGB input. The output is working even if the display unit is turned off, but power cable/supply must
be connected/provided.
Synchronisation:
Resolutions:
• VGA
• SVGA
• XGA
• SXGA
• UXGA
• WUXGA
DVI-I Signal IN
RGB Signal IN
RGB Signal OUT
Multifunction
USB I/O
AC Power IN
AC Power OUT
If DC Power IN
AC, Keypad, Bonded
AC, Keypad
AC+DC, Keypad, Bonded
AC+DC, Keypad
Factory Options:
• Optical Bonding Technology
TESTING/APPROVALS
& CERTIFICATES
This product have been tested / type approved by the following classification societies:
IEC 60945 4th (EN 60945:2002)
ClassNK - Nippon Kaiji Kyokai GL - Germanischer Lloyd
DNV - Det Norske Veritas
ABS - American Bureau of Shipping
BV - Bureau Veritas
CCS - China Classification Society LRS - Lloyd’s Register of Shipping
51
IND100129-172
2/2