Download USER MANUAL

POWERTAP PRO COMPUTER SETUP
1. Push either button to activate the computer.
(Note: the version of firmware is displayed in the lower
corner-shown below)
PRO
2.0
Press select to choose the desired set up and press mode to begin set up.
E = exit, return to ride mode
d = restore default settings
T= Test Mode
Setup modes 1-4 see following pages.
Note: computer illustrations on the following pages display the factory default settings.
Set
Ed
t
1234
2. To enter the set up main menu hold down both
buttons until the main menu is displayed
Main Menu
21