Download User Manual

POLARIS REMOTE
POLARIS II Remote
5.2.3
Rotating/Inclining
Installation
Rotating
−
The POLARIS is fixed in position on the supporting system by means of two hexagon
socket-head screws (M10) and a handle screw.
−
The angle of rotation can be changed once the screws have been loosened.
Tools: hex key 5 mm
Illustration 11: Swivel-mounted adapter
Inclining
−
The POLARIS is fixed in position by means of the two side handle screws.
−
The angle of inclination can be changed once both handle screws have been
loosened.
Illustration 12: Side handle screw
Technical data subject to change without notice.
07/2012
19/38