Download USER MANUAL - Camboard Electronics

im Vertrieb von
CAMBOARD
Electronics
Contents
Contents
1 2 2.1 3 3.1 3.2 3.3 3.4 3.5 4 5 6 6.1 6.2 6.3 6.4 6.5 6.6 Introduction
Getting Started
Quick Start
Overview
About the VP-26
About the Power Connect™ Feature
Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP)
Recommendations for Achieving the Best Performance
Terminology Used in this User Manual
Your Presentation Matrix Switcher
Installing the VP-26 on a Rack
Connecting the VP-26 Presentation Matrix Switcher
Connecting the VP-26 Rear Panel
Connecting the Balanced/Unbalanced Stereo Audio Input/Output
Wiring the CAT 5 LINE OUT RJ-45 Connector
Connecting a PC
Connecting via RS-485
Controlling via ETHERNET
6.6.1 6.6.2 6.6.3 Connecting the ETHERNET Port directly to a PC (Crossover Cable)
17 Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable) 19 Control Configuration via the Ethernet Port
19 6.7 6.8 Controlling via RS-232 and RS-485
DIP-switch Settings
19 21 6.8.1 Setting the Machine # DIP-switches
21 7 7.1 7.2 7.3 8 8.1 Operating Your Switcher
The Front Panel Buttons
The Independent Switchers AFV Mode
The Master Audio Breakaway Mode
Flash Memory Upgrade
Switcher Flash Memory Upgrade
22 22 23 25 26 26 8.1.1 8.1.2 8.1.3 Downloading from the Internet
Connecting the PC to the RS-232 Port
Upgrading Firmware
26 26 27 8.2 Ethernet Flash Memory Upgrade
31 8.2.1 8.2.2 8.2.3 Downloading from the Internet
Connecting the PC to the RS-232 Port
Upgrading Firmware
32 32 32 9 10 Technical Specifications
Hex Table
34 35 www.camboard.de
1 1 2 3 3 4 4 5 5 5 11 12 12 15 15 16 16 17 i
Tel. 07131 [email protected]
Fax 07131 911203