Download USER MANUAL - CAMBOARD Electronics

Transcript
im Vertrieb von
CAMBOARD Electronics
Table of Hex Codes for Serial Communication
For delay times exceeding 127ms, you need to send two commands (eight
bytes).
The first command includes the most significant bits:
Byte 1 should be 63 (7FH)
Byte 2 should be 127 (80H) plus Most Significant bits of required delay
Byte 3 should be 127 (80H)
Byte 4 should be 127 (80H) plus machine number (from 1 up to 15)
The second command includes the less significant bits as described
previously for command 22.
Table 16 describes hex code examples for setting increased audio delay times:
Table 16: VS-44HC Hex Codes for increasing the Audio Delay Time
Delay Time for IN 1
[msec]
128
130
200
680
Command
7F
I6
7F
I6
7F
I6
7F
I6
80
81
80
81
80
81
80
81
81
80
81
82
81
C8
85
A8
81
81
81
81
81
81
81
81
To increase, for example, the IN 1 audio delay time by 1msec, the hex code
would be:
I8
82
8C
81
To decrease, for example, the IN 4 audio delay time by 1msec, the hex code
would be:
I8
www.camboard.de
84
8D
81
37
Tel. 07131 [email protected]
Fax 07131 911203