Download iS15-2K User Manual.p65

4. Controlling the projector
iS15-2K Cinema Projector: User Manual
Introduction
Notes
For information about how to
connect the projector, see
Connecting the projector in
section 2. Installation, and
Connections in section
6. Appendix.
There are three ways to control the projector:
•
the buttons and menus available on the control panel;
•
the buttons on the remote control
(in conjunction with the menus on the control panel LCD screen);
•
a reduced set of menus on a remote computer using a web browser
(with the IP address of the projector typed into the browser address field).
For more information about how
to use the menus, see Using
the menus, later in this section.
None of the menus are ever displayed on the projection screen.
For a full listing of all the
menus, see Menu trees, later in
this section.
Using the control panel
When using any menu that
requires text or numeric input,
you will need to use the remote
control.
LCD Screen
Backlight switch
for LCD screen
Power button:
On/ Standby
Lens
adjustment
buttons
Menu
selection
buttons
Status indicator:
off = normal
green flashing = error
(see error code on LCD screen)
Power indicator:
green = power on
green flashing = shutter closed
orange = standby
orange flashing = cooling fans running
page 4.2