1
Download User Manual - DENX Computer Systems
Transcript
Using PEEDI COREn_BREAK_PATTERN Description Software breakpoint pattern Argument 32-bit value COREn_WORKSPACE Description Base and length of a region in RAM, used for agent, which allows much faster programming. Argument Valid base address within RAM and length in bytes separated by comma COREn_DATASPACE Description Base and length of a region in RAM, used for agent, which allows much faster programming. If this parameter is present, PEEDI will use the workspace for storing only the agent code and the dataspace for the agent data. This is useful when using internal RAM for agent programming, where the internal RAM is code or data only, for example Blackfin CPUs Argument Valid base address within RAM and length in bytes separated by comma COREn_DCC_PORT Description TCP port, the target’s DCC channel to be routed to. Argument 1024 to 65535 and optional type of the transfer – 8/32-bit COREn_PATH Description This parameter defines the default path to be used if only a file name (without the full path) is provided to a PEEDI command. Argument DEFAULT_PATH COREn_FILE Description This parameter defines the default memory (multi) load command’s arguments. This parameter may have two or three arguments. The first argument is the file to be programmed. The second argument is the file type – BIN, SREC, IHEX or ELF. The third argument is mandatory for binary files and optional for all other types of files – it is the address where the file should be loaded. Argument FILE[, FORMAT][, ADDRESS] COREn_LOCKOUT_RECOVERY Description If this parameter is present, PEEDI automatically executes a “JTAG Lockout Recovery” procedure during reset processing if the MAC7100, STR9 or AVR32 flash is secured. Argument YES/NO for STR9 and AVR32 devices For MAC7100 devices 7-bit value for the CFMCLKD register used during the “JTAG Lockout Recovery”. Calculate this parameter based on the reset system clock (PLL disabled). For example: 19 – CLKD for 8MHz system clock 9 – CLKD for 4MHz system clock PEEDI User’s manual 25 www.ronetix.at
