Download DeViSoRGrid 2 User's Manual
Transcript
5 DEFINING COARSE MESHES 14 The complete domain for the DFG benchmark 4. To test your mesh, start a test run of the TriGen program by selecting Refine from the Grid menu and enter the following parameters in the dialog: ... 5. That’s it, start the FeatFlow simulation. And don’t forget to save your work before you start. 5.4 Remarks on mesh definition When defining meshes, the following is essential for the correctness of your grid: • Do not mix element types. • The nodes of an element must have counterclockwise orientation. • Elements should not be degenerated: No extremal inner angles should occur, and large aspect ratios should be avoided. • Neighbouring elements should not differ much in size. • Generally, place most nodes where you expect interesting things to happen. • It is always a good test to start a TriGen run on the mesh you created. If it does not crash, this indicates you created a feasible grid.