Download USER MANUAL

TimeLine - User Manual
®
Rear Panel
INPUTS: High impedance inputs.
Use LEFT input for mono. RIGHT
IN is used as an effect return if the
feedback loop is selected.
POWER: NEVER plug into voltage
higher than 9VDC. Requires at least
300mA of available current. 9V DC
center negative polarity.
OUTPUTS: Use LEFT output
for mono. RIGHT OUT is
used as an effect send if the
feedback loop is selected.
EXP: Connect an
expression pedal or
switch for external
tap tempo. See EXP
Connections
MIDI: Full featured MIDI input
and output supporting Midi CCs,
Program changes, etc. See the
MIDI Specification section for
a complete list of features and
commands.
LOOP SWITCH: Set switch to
feedback loop to insert an effect
in the delay feedback path. See
Feedback Loop.
pg 3