Download User's Guide DCAM Framecapture Development Kit

USER’S GUIDE
DCAM FRAME CAPTURE DEVELOPMENT KIT
Date
: 28 August 2006
Doc. no. : DCAM_FC_DevKit_UG
Iss./Rev : 1.20
Page
: 38
msl.h
Description
Installs an interrupt handler for the given interrupt number in the interrupt vector table. The interrupt
numbers are defined in c5501.h. The interrupt handler must be defined with the interrupt keyword.
synopsis
void IntHook (int iIntNumber, void (*pHandler)(void));
parameters
int iIntNumber
pHandler
number of interrupt to be inserted
pointer to the interrupt handler
return value
none
6.5.3 IntEnable
Enables the specified interrupt in the corresponding Interrupt Enable Register. The interrupt
numbers are defined in c5501.h.
defined in
msl.h
synopsis
void IntEnable (int iIntNumber)
parameters
int iIntNumber
number of interrupt to be enabled
return value
none
6.5.4 IntDisable
Disables the specified interrupt in the corresponding Interrupt Enable Register. The interrupt
numbers are defined in c5501.h.
defined in
msl.h
synopsis
void IntDisable (int iIntNumber)
parameters
int iIntNumber
number of interrupt to be disabled
return value
none
6.5.5 IntClear
Clears the specified interrupt in the corresponding Interrupt Flag Register if pending. The interrupt
numbers are defined in c5501.h.
defined in
msl.h