Download Watson TSQ Module 1.1 User Guide Version A

4
Acquiring Data in the TSQ Module Application
Monitoring the Run Status
2. To display the spectrum trace, select the Show Spectrum Trace check box, and select one
of the following spectrum trace options:
• To continuously update the spectrum trace of the most current scan, select
Continuous Update.
–or–
• To display the spectrum trace of the selected peak, select Manual Select.
3. To specify the range for the real-time display, do the following:
a. Select the User-defined RT range (min) check box.
b. Enter a value for the beginning of the range.
c. Enter a value for the end of the range.
4. To update the current display with your settings, click Apply Settings.
The TSQ Module application immediately your changes.
After you apply these settings, click on a peak in the real-time display.
Y To zoom the real-time display
1. Drag your cursor in the chromatogram or spectrum trace panes to define a region to
enlarge.
2. To return to the original display, right-click and choose Reset Scaling from the menu.
Pausing, Stopping, and Cancelling Runs
A run submitted by the Watson application enters the TSQ Module Run Manager view with
the Pending status. From the Run Manager view, you can submit a run to the acquisition
queue or cancel the run, sending it back to the Watson application.
When you submit a run for acquisition, the run moves to the acquisition queue, and the
status in the Run Manager view is Acquiring. From the acquisition queue, you can pause a
run and resume it, stop the currently acquiring sample and continue to the next sample, or
remove a run from the acquisition queue, sending it back to the Run Manager view.
Follow these procedures:
• Stopping Sample Acquisition
• Pausing a Run
• Removing a Currently Acquiring Run from the Acquisition Queue
• Removing a Non-Acquiring Run from the Acquisition Queue
• Cancelling a Run in the Run Manager View
56
Watson TSQ Module User Guide
Thermo Scientific