Download Watson TSQ Module 1.1 User Guide Version A

4
Acquiring Data in the TSQ Module Application
Managing a Run
Y To cancel a run and return it to the Watson application
1. Click the row selection tab to select the run and enable the Cancel Run button, shown in
Figure 21.
To cancel a run, the status of the run must be either Pending or Stopped.
Figure 21. Cancel Run button in the row selection tab
Click here to select the run.
2. Click Cancel Run.
The system confirms that you want to cancel the run and return it to the Watson
application.
3. Click Yes to confirm the cancellation.
• If you are a Watson user and the run has not begun acquisition, you can assign the
run to a different instrument and resend the run to the TSQ Module application.
• If the run has begun acquisition, a Watson user can resend the run to the TSQ
Module application, but it must be assigned to the same local instrument. The entire
run must complete acquisition on a single instrument. A run returned for reinjection
cannot be assigned to a different instrument.
Y To cancel multiple runs
You can cancel Pending or Stopped runs and return the runs to the Watson application. You
cannot cancel Acquiring or Submitted runs.
1. Select the runs that you want to cancel and return to the Watson application.
• Use the SHIFT key to select a group of consecutive runs.
• Use the CTRL key to choose a group of non-consecutive runs.
The selected rows are highlighted, as shown in Figure 22.
Thermo Scientific
Watson TSQ Module User Guide
35