Download LightFactory User Guide

LightFactory
A Guide for Users
Reference/Window Overview
Cue List Editor
Enable Playback
Check this option at the top of the window to enable the special GO
and BACK control on the Enttec playback wing. You can also
access this using a programmable keyboard in the same way as
shortcuts. The key sequence to run this special playback:
Cue Go: control - q followed by “A1”
Cue Back: control - q followed by “Z1”
Snapshot when adding cues
When this option is checked, adding a cue within the “cue list
editor” will operate in the same way as the “add active channels to
cue” in the channel display. As soon as a cue is added then the
channels that are currently active will also be added with the state
of the fixtures also recorded.
Cut to cue on double click
By default, when you double click on a cue the system will execute
that cue applying all of the set fade and delay times. By selecting
this option the double click operation will cause the selected cue to
execute immediately.
Print Cue List
Click on the “Print Cue List” button to get a physical copy of all of
the cues in the cue list. Clicking on this button will open a preview
window that will show the layout of how the information will be
printed.
176
© 2004 - 2007 Dream Solutions Ltd