Download Mounting and Operating Instructions EB 8384-5

Attachment to the control valve – Mounting parts and accessories
Table 6: General accessories
Order no.
Serial interface adapter (SAMSON SSP interface to RS-232 port on a PC)
1400-7700
Isolated USB interface adapter (SAMSON SSP interface to USB port on a PC) including
TROVIS-VIEW CD-ROM
1400-9740
Table 7: Attachment of external position sensor
Order no.
Template for mounting position sensor on older mounting parts. See note on page 38
1060-0784
Mounting parts for actuators with 120 cm². See Fig. 15 (left).
Direct attachment
1400-7472
1400-6820
G 1/8
Connecting plate (9, old) with
Type 3277-5xxxxxx.00 Actuator
NPT
1400-6821
1/8
Connecting plate (new) with Type 3277-5xxxxxx.01 Actuator (new) 1)
1400-6823
Mounting parts for actuators with 175, 240, 350, 355 and 700 cm². See Fig. 15
(right).
1400-7471
NAMUR attachment
Mounting parts for attachment to NAMUR rib using L or XL lever. See Fig. 16.
1400-7468
Attachment to
Type 3510 Microflow Valve
Mounting parts for Type 3271 Actuator with 60 cm². See Fig. 17.
1400-7469
VDI/VDE 3845 (September 2010), see section 15.1 for details.
Actuator surface corresponds to fixing level 1
Attachment to
rotary actuators
Size AA1 to AA4 with follower clamp and coupling wheel,
version with CrNiMo steel bracket. See Fig. 18.
1400-7473
Size AA1 to AA4, heavy-duty version
1400-9384
Size AA5, heavy-duty version (e.g. Air Torque 10 000)
1400-9992
Bracket surface corresponds to fixing level 2, heavy-duty version
1400-9385
SAMSON Type 3278 with 320 cm² and VETEC Type S320, heavy-duty version
1400-5891
and
1400-9974
Connecting plate (6)
Accessories for
positioner
1400-9974
SAMSON Type 3278 with 160 cm² and VETEC Type S160 and Type R, heavy-duty version
Pressure gauge bracket (7)
Pressure gauge mounting kit up to max.
6 bar (output/supply)
1400-7461
G ¼
¼ NPT
1400-7462
G ¼
1400-7458
¼ NPT
1400-7459
Stainless steel/brass
1400-6950
Stainless steel/stainless steel
1400-6951
Bracket to mount the positioner on a wall (Note: The other fastening parts are to
be provided at the site of installation as wall foundations vary from site to site).
1)
0309-0111
Only new connecting plates can be used with new actuators (Index 01). Old and new plates are not interchangeable.
50 EB 8384-5 EN