Download EB82 - iCEstick Evaluation Kit User's Guide

Transcript
iCE40 16-WLCSP Evaluation Kit
Board Configuration and Programming
The board allows for programming of the iCE40 or the SPI Flash:
• USB to iCE40 SPI port J16
• SPI Flash Programming J25 shunt pins 1-3 and 2-4 (Default shunted)
– U9 Micron Technology Inc part number M25P80-VMW6TG
• iCE40 Configuration or Programming J25 shunt pins 1-2 and 3-4
– U15 iCE40LP1K-SWG16
• CRESETB can be asserted by pushing SW1
– Can be probed with J11
• Done LED D3
– Can be probed with J28 (Default shunted)
Details of the iCE40 Board for use in programming are shown in Figure 4.
Figure 4. Configuration and Programming Details
J11 = CRESETB Probe
CRESETB
M25P80-VMW6TG
iCE40LP1K-16SWG
J25 = iCE40 or
SPI Flash
USB Port
J28 = DONE Probe
DONE LED
7