Download Mounting and Operating Instructions EB 5477 EN

Operation
Select End.
Exit the parameter level.
Return to the operating level.
Note! The controller automatically returns to the operating level when keys are left unpressed
for longer than two minutes.
Note! Use just the menu for the individual days to check the programmed time schedules. When
time blocks are selected, the times-of-use for the days selected are reset to default settings!
1.6.1 Entering public holidays
The controller uses the times-of-use programmed for Sundays on public holidays.
You can enter a maximum of 20 public holidays.
Parameter
WE
Range of values
Public holidays
01.01; 01.05;
25.12; 26.12
01.01 (1 Jan) to 31.12 (31 Dec)
Switch to the configuration and parameter level.
PA appears on the display.
How to proceed:
Press the enter key.
The time appears on the display,
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
blinks slowly.
Select public holidays data point.
appears on the display.
Press the enter key to access data point.
PA
Y2
M
Press the arrow key until – – – – appears, if necessary.
M
Y2
Y1
M
M
M
Y3
Y2
Y1 Y2 Y3
Press the enter key.
The
symbol blinks quickly.
Change the date of the public holiday.
Confirm the date of the public holiday.
To enter other public holidays, press the arrow key until – – – – appears on the display
again. Repeat the steps in the gray box.
14
EB 5477 EN