Download SIMNRA User's Guide - Max-Planck

Transcript
SIMNRA performs the calculation of dual scattering in the following way: During each
step of the incident ion particles are scattered into the whole sphere of 4π. We introduce
the polar system with the polar angles ψ, φ, see fig. 4.8. After the first scattering event the
scattered particles have the direction ψ, φ. The scattering angle θ1 of the first scattering
event is given by
cos θ1 = sin α sin ψ sin φ − cos α cos ψ
SIMNRA uses the Rutherford cross-section for the calculation of the number of scattered
particles in the first scattering event. The new angle α0 of the particles after the first
scattering is
α0 = 180◦ − ψ
The scattering angle θ2 of the second scattering event is given by
cos θ2 = sin β sin ψ sin φ + cos β cos ψ
SIMNRA subdivides the whole sphere of 4π into 10 ψ-intervals and 12 φ-intervals, resulting
in 120 solid angle intervals. SIMNRA considers only trajectories with scattering angles
θ1 , θ2 > 20◦ for dual scattering. Trajectories with smaller scattering angles are very similar
to single scattering trajectories. For each solid angle interval a full backscattering spectrum
with the starting depth of the particles equal to the depth of the incident ions and the
new incident angle α0 and the new scattering angle θ2 is calculated.
Fig. 4.9 compares the simulated spectra with single and dual scattering for 500 keV
4 He
ions incident on a 100 nm gold layer on top of silicon with experimental data. With
the inclusion of dual scattering the experimental results are much better approximated.
Dual scattering gives the background between the low energy edge of Au and the Si edge,
and the steeper increase of the gold spectrum is better described. The results with dual
scattering are slightly lower than the experimental results. This is due to trajectories with
more than two scattering events.
53